Porcelain and ceramic tiles can look almost identical on a display board, and the price difference is often small. Underneath, they are made differently, and that changes where each one works best.
What is the difference?
Both are made from clay that is pressed and fired in a kiln. Porcelain uses a finer, denser clay mix fired at a higher temperature. The result is a harder, less porous tile. Under the British and European standard (BS EN 14411), porcelain tiles have a water absorption of 0.5% or less.
Ceramic tiles have a softer, more porous body. Most are glazed on the surface, so the glaze provides the colour and the protection.
Porcelain: where it works best
- Floors. The dense body stands up well to foot traffic, furniture and dropped items.
- Bathrooms, shower areas and kitchens. Low water absorption makes porcelain a strong choice for wet rooms and splash zones.
- Outdoors. Only porcelain that the manufacturer states is suitable for exterior use, usually thicker 20mm porcelain pavers, should be used outside, where frost resistance matters.
- Large formats. Big tiles such as 60 x 120 cm are almost always porcelain.
Ceramic: where it works best
- Walls. Ceramic is lighter, which helps on walls, and it is easier to cut around sockets, pipes and window reveals.
- Splashbacks and feature walls. Glossy glazes, handmade-look finishes and bright colours are common in ceramic ranges.
- Lower-traffic floors, where the manufacturer rates the tile for floor use.
Cutting and fitting
Porcelain is harder, so it needs a good-quality cutter or wet saw and diamond blades. Ceramic is quicker to cut and drill. If you are fitting tiles yourself, this can make a real difference to the time a job takes. Always follow the adhesive manufacturer's guidance for the tile type and the surface you are fixing to.
Does porcelain cost more?
Often, but not always. Price depends far more on the size, finish and range than on porcelain versus ceramic alone. At The Tile People, every tile shows its price per square metre from the start, so you can compare like with like. Homeowner or trade, everyone pays the same price.
Quick answer
| Porcelain | Ceramic | |
|---|---|---|
| Body | Dense, low porosity | Softer, more porous |
| Best for | Floors, wet areas, large formats, exterior (where rated) | Walls, splashbacks, decorative finishes |
| Cutting | Harder, needs better tools | Easier to cut and drill |
| Weight | Heavier | Lighter |
Not sure which you need? Bring your room measurements or a few photos to the showroom and we will talk you through the options.
See it in person. Our new showroom at The Barn, Hundred Acre Lane, Wivelsfield Green (near Haywards Heath) opens in early 2027. Until then, browse tiles online or get in touch with any questions.